Feature:

1. The serial port camera can directly read the captured image through the serial port. It can obtain the image compression data by simply sending serial port instructions, and the image output format is compressed JPEG file format.
2. The module can currently obtain images at 800×600, 640×480, 320×240, and 160×120 resolutions.
3. Continuous sending instructions can obtain continuous image output. When the resolution is set to the lowest, continuous output can reaches a speed of about 5 frames.
4. Supporting a variety of microcontroller, function board camera module.
5. Can be directly connected for SCM, for Ardunio, for raspberry PI, for ARM, etc.

Specification:

Condition: 100% Brand New
Item Type: Camera Module
Material: Electric board
Purpose: Color photography, simple image recognition, car tracking, automatic tracking, automatic control
Working Voltage: 3-3.3V
Camera Parameters
Chip: OV2640
Photosensitive Array: 1632×1232 maximum format UXGA
IO Voltage: 1.7V-3.3V Analog voltage 2.5-3.0V (internal LDO supplies 1.2V to the core)
Power Consumption: TBD dormancy <20μA
Temperature Operation: -30℃ to 70℃
Stable Operation: 0℃ to 50℃
Output Format (8-bit) : YUV/ YCBCR4:2:2 RGB565/555/444 GRB4:2:2 RGB Data
Optical Size: 1/4in
Field of View: 25°
Maximum Virginity Rate: 15fps SXGA
Sensitivity: 1.3V/(Lux-sec)
Signal to Noise Ratio: 40 dB
Dynamic Range: 50 dB
Browse Mode: Line by line
Electronic Exposure: Lines 1 to 1247
Pixel Area: 2.2μm x 2.2μm
Dark Current: 15mV/s at 60℃
Lens Parameters:
FL: 3.6mm
Horizontal Field of View: 102°
Minimum Distance: 20mm
Format: 1/3IN
Mount: M12X0. 5
Aperture: F2.0
Size: Approx. 14 x 15.7mm / 0.6 x 0.6in

The output lines of serial port are: VCC, RXD, TXD and GND
Wherein: VCC: 3-3.3V
TX: TTL level serial port sending terminal
RX: TTL level serial port receiver
GND: Earth terminal

Package List:

1 x Camera Module